| Add a USB printer
connection with PowerRIP X on 10.5:
|
1) |
Turn your printer on. |
2) |
Open the "Print & Fax"
found in the System preferences |
3) |
In the Printer List window click the
plus sign "+" under the list of printers. |
4) |
Choose your "Default" for
USB printers or
"Appletalk" for Epson Appletalk cards prior
to the 4800 printer |
5) |
In the "Name" window,
slightly change the name to be unique, perhaps add
"RIP" to the front of it. |
6) |
Go to the "Print Using"
window and select "iProof PowerRIP X" |
7) |
Skip the "Location" window,
unless you need to tell others the printer's location
in the building |
|
In
"Print Using" choose "Select a driver
to use". Now type "power" next to the
magnifying glass.
|
|
Choose
your printer's PowerRIP X PPD from the list below
|
|
Click add
and your printer will added to the list.
*SPECIAL
Instructions for the Epson Stylus Photo R800, 1400,
R1800, PRO 3800
|
|
For the
following printers, Open the PowerRIP X Utility and go
to "File" and down to "Add New
Printer"
Only for the Epson Stylus Photo R800, 1400, R1800, PRO
3800
|
|
If you
have installed the Epson driver for the Epson Stylus
Photo R800, 1400, R1800, PRO 3800 and created an Epson
printer you will see it on the list. Select your Epson
printer and then choose;
"Add PowerRIPX Printer"
|
|
Create a
name for your PowerRIPX printer, and hit OK ,and OK
again.
Your printer has just been added
|
| Add a USB printer
connection with PowerRIP X on 10.4:
|
1) |
Turn your printer on. |
2) |
Open the "Printer Setup
Utility" |
3) |
In the Printer List window click
"Add". |
4) |
Choose your "USB" or
"Bonjour" printer |
5) |
In the "Name" window,
slightly change the name to be unique. |
6) |
Go to the "Print Using"
window and select "iProof PowerRIP X" |
7) |
In the "Model" window
select your printer. |
|
Click add
and your printer will added to the list.
|
| Add a USB printer connection with
PowerRIP X on 10.2 and 10.3:
|
1) |
Turn your printer on. |
2) |
Open the "Sharing Folder" located in "System Preferences." |
3) |
Turn "Printer Sharing" On, Off, and back On again. Do this two times. |
4) |
Leave Printer Sharing on and close the "Sharing Folder." |
5) |
Open "Print Center," in Applications/Utilities. |
6) |
Select and KEEP DOWN the "Option Key" as you double click "Add Printer." |
7) |
When the screen changes release the Option Key. |
|
Pick "Advanced" at the bottom of the first drop down window. If you do not see Advanced in the list, repeat step 6 and hold the option key down longer.
|
9) |
In the "Device" window, choose your Epson Stylus printer model. |
10) |
In "Device Name" personalize the printer name. |
11) |
In Device URI do nothing, this is your printer's USB address. |
12) |
In Printer Model, choose iProof PowerRIP X. |
13) |
PPDs will appear, select the one for your printer. |
14) |
Click Add Printer. |
15) |
In File/Page Setup choose the printer you just created. |
|
In File/Print, in the drop down window under "Copies and Pages" choose your Resolution and Media type.
|
top
