PC Rip Error Messages at the time of Installing Validation

Error 2, 14, 15, 16, 20, and 21,

            Selected authorization could not be written / updated

The AX NF ZZ May be in Read only mode

Error 3

            A authorization was found and could not be written to

                        The AX NF ZZ May be in Read only mode, corrupt, or be for another PowerRIP program

                                    Must be removed and re-activated. (Remove the AX NF ZZ folder and re-activate) (See Below)

Error 10,

            Selected authorization does not allow resetting

Error 18,

            Attempted to activate an already active authorization

                        The Rip is activated.

PC Rip Error Messages at Run time (When the RIP starts)

Error 3,

            It indicates that the authorization has been corrupted on the hard drive,

and must be removed and re-activated.

                                    (Remove the AX NF ZZ folder and re-activate)  (See Below)

Error 5,

            Indicates that the specified authorization is not allow on the current medium.

                        Trying to run on a removable or USB drive

Error 7

            This Error occurs when an authorization has been moved to an unauthorized media

Error 15

            This Error occurs when the identity of the selected medium could not be determined.

                        There is most likely a problem with the “C” drive

                                    May want to run a Disk ERROR CHECKING program

Error 192

            This Error occurs when there was a hard drive serial number mismatch

                        The hard drive has been changed.  Must reactivate

Error 204,

            Incorrect Lib..

                        Must have the 32 bit Lib. (call iProof)

Error 226 to 231

            The authorization was copied and not installed

                        must be removed and re-activated. (Remove the AX NF ZZ folder and re-activate)  (See Below).

...

To Remove the AX NF ZZ folder

Step 1:  To remove the AX NF ZZ folder    Go to the “C” drive    (My computer, “C” drive)    (Highlight the AX NF ZZ folder, right click and delete)

IF YOU DO NOT FIND THE AX NF ZZ FOLDER ON YOUR "C DRIVE, PLEASE FOLLOW THE STEPS BELOW FOR YOUR OPERATING SYSTEM: 

WINDOWS XP:
If the AX NF ZZ folder is not visible then  and you are on Windows XP Click on TOOLS in the top task bar  Click on FOLDER OPTIONS   Click on VIEW  Insure that the SHOW HIDDEN FILES AND FOLDERS has a check mark   
Insure  NO  check mark in  HIDE FILES EXTENSIONS FOR KNOWN TYPES  
And  there is NO check mark HIDE PROTECTED OPERATING SYSTEMS FILES    Once the above are set, click APPLY, then OK      Then go to step 1

VISTA:
If the AX NF ZZ folder is not visible then  and you are on VISTA Go to the Control panel and select "Classic View" Then find Folder Options.  In FOLDER OPTIONS  Click on VIEW  Insure that the SHOW HIDDEN FILES AND FOLDERS has a check mark .
Insure  NO  check mark in  HIDE FILES EXTENSIONS FOR KNOWN TYPES  
And  there is NO check mark HIDE PROTECTED OPERATING SYSTEMS FILES    Once the above are set, click APPLY, then OK      Then go to step 1